Dynamo LED Displays supplies fine-pitch LED tiles engineered to integrate directly with beMatrix modular frame systems. These LED panels — often referred to as “LED skin” — slot into standard beMatrix frames, replacing traditional graphics or fabric infills with high-resolution LED video content. The result is a modular exhibition stand wall that doubles as a seamless video display.
beMatrix-compatible LED tiles sit flush within the aluminium frame channels, making the frame itself invisible from the front. This clean integration means stand visitors see uninterrupted LED content across the full wall area, with no visible bezels or mounting hardware.
WHAT IS BEMATRIX?
beMatrix is a modular aluminium frame system widely used by exhibition stand builders and contractors across Europe and the UK. The frames lock together in standardised widths and heights, allowing stand designers to construct walls, partitions, and structures of virtually any size. beMatrix frames accept a range of infill materials — fabric, printed panels, lightboxes, and LED tiles — making them a versatile backbone for trade show and experiential builds.
The system is popular with stand contractors because it is reusable across multiple shows, fast to assemble and derig, and compatible with a growing ecosystem of AV and LED integration products.
HOW LED TILES INTEGRATE WITH BEMATRIX FRAMES
Dynamo’s beMatrix-compatible LED panels are designed to the exact dimensions of standard beMatrix frame openings. Each LED tile clips or slides into the frame channel, locking into position without additional substructure. Power and data cabling routes through the existing frame channels and rear-access points.
This “LED skin” approach means:
- No secondary mounting structure is needed — the beMatrix frame is the mount.
- LED panels can be swapped, repositioned, or replaced with fabric or print infills between shows.
- Build and derig times remain comparable to a standard beMatrix fabric wall.
- Multiple LED panels tile together across adjacent frames for large-format video walls within the stand structure.
For stand builders already working with beMatrix, adding LED content to a stand wall requires no change to the frame specification — only the infill changes.
FINE-PITCH LED FOR EXHIBITION STANDS
Dynamo supplies 1.2mm-class fine-pitch LED tiles compatible with beMatrix frames. At this pixel pitch, content is sharp and legible at the close viewing distances typical of exhibition halls — attendees can stand within a metre of the screen and still see clean, detailed imagery.
This same fine-pitch LED technology is also compatible with Aluvision frame systems, giving stand contractors flexibility across the two most widely used modular frame platforms in the UK and European exhibition market.
TECHNICAL SPECIFICATIONS
For exhibition stand builds, Dynamo typically specifies the DRE series — exhibition-grade LED panels with front and rear service access, available in indoor and outdoor versions. Key specifications from the DRE datasheet:
| Specification | DRE P1.55 | DRE P1.93 | DRE P2.58 |
|---|---|---|---|
| Pixel pitch | 1.55mm | 1.93mm | 2.58mm |
| Cabinet size | 496 × 496 × 55/62mm | ||
| Cabinet resolution | 320 × 320 | 256 × 256 | 192 × 192 |
| Module size | 248 × 248mm | ||
| Weight | 9.2 kg per cabinet | ||
| Brightness (indoor) | >800 nits | ||
| Brightness (outdoor) | >3,500 nits | ||
| Refresh rate | 1,920–3,840 Hz | ||
| Viewing angle | 160° (H) / 160° (V) | ||
| Contrast ratio | 6,000:1 | ||
| IP rating | IP40/IP20 indoor; IP65/IP54 outdoor | ||
Outdoor DRE panels are also available in P2.95 and P3.875 pitches for larger-format external applications. Where a stand design calls for pitches finer than 1.55mm — such as close-quarters product demonstrations — Dynamo’s DYF flip-chip COB range extends down to 1.25mm and 0.93mm, with a 20,000:1 contrast ratio, 4,200–4,320 Hz refresh rates and front-maintenance access. To see how the DRE range compares for hire versus permanent installation, read our guide on DRE rental LED versus fixed-install LED.
BEMATRIX B62 AND ALUVISION COMPATIBILITY
beMatrix’s b62 frame system takes its name from its 62mm profile depth. Dynamo’s DRE exhibition cabinets measure 496 × 496mm with a 55/62mm cabinet depth, which is why they sit flush within the frame face rather than protruding from the stand wall. The 496 × 496mm cabinet format is designed for modular grid integration, and front and rear service access means individual panels can be maintained without dismantling the surrounding structure — a practical advantage in tight exhibition stand environments.
The same panels integrate with Aluvision’s modular grid system, so contractors who work across both platforms can carry one LED inventory between beMatrix and Aluvision builds. In each case the frame itself provides the mounting structure: no bolt-on brackets, no secondary steelwork, and no change to the frame specification already on the stand drawing.
FEATURES
- Modular aluminium frames customisable to exact stand specifications — add or remove frame sections as the design requires.
- LED tiles slot directly into beMatrix frame channels, sitting flush with the frame face.
- Panels and textiles are interchangeable within the same frame, allowing mixed LED and fabric walls on a single stand.
- Rear-access cabling through existing frame channels keeps wiring hidden and simplifies on-site AV integration.
- Lightweight panels (approximately 7 kg per tile) reduce manual handling requirements during build.
BENEFITS
Design flexibility – beMatrix frames accept any combination of LED, fabric, and print infills, so stand designers can place video content exactly where it has the most impact and use traditional graphics elsewhere.
Reusable and sustainable – The modular frames are built for repeated use across multiple exhibitions. LED tiles are swappable between frames and shows, reducing single-use waste.
Fast build and derig – Clip-in LED panels install at a similar pace to fabric infills. For contractors working to tight exhibition hall build schedules, this keeps labour costs and timelines in check.
Rental and purchase – Dynamo offers beMatrix-compatible LED tiles on both a hire basis and for outright purchase, so stand builders can match their investment to project frequency.
EXHIBITION AND TRADE SHOW APPLICATIONS
beMatrix-compatible LED is used across a range of exhibition and experiential settings:
- Trade show stands – Full-height LED walls integrated into modular stand structures, replacing static graphics with dynamic video content.
- Experiential installations – Immersive LED environments where multiple LED-skinned beMatrix walls surround visitors, similar to the LED cube installations Dynamo has delivered for experiential events.
- Conference stages and backdrops – LED-filled beMatrix frames used as stage sets, providing content flexibility across multiple sessions without physical set changes.
- Retail pop-ups and brand activations – Portable, reusable LED walls that travel between venues and reconfigure to suit each space.
For bespoke requirements — non-standard sizes, curved configurations, or multi-surface installations — see Dynamo’s custom LED display capabilities.
PLANNING A BEMATRIX LED STAND
Most beMatrix LED projects start with three decisions: which walls carry video content, what pixel pitch suits the viewing distance, and whether to hire or purchase the panels. For a typical trade show stand where visitors approach within one to two metres, DRE P1.55 or P1.93 panels are the usual starting point; larger backdrop walls viewed from the aisle can step out to P2.58. Dynamo has delivered this approach in practice — see our right-angle exhibition LED wall case study, where an L-shaped LED wall was specified for a stand build to improve visibility from two aisles at once.
For panel counts, formats and hire options across the exhibition range, our guide to event and rental LED display panels covers the practical detail stand builders ask about most.
To scope a beMatrix LED wall for a specific stand, use the LED screen configurator — enter the wall dimensions and it returns the panel layout and specification for your build.
WHY WORK WITH DYNAMO LED DISPLAYS
Dynamo’s technical team works directly with stand builders and exhibition contractors to specify, supply, and support beMatrix-compatible LED installations. This includes:
- Pre-show technical consultation on frame layout, pixel pitch selection, and content resolution planning.
- On-site installation support and AV integration for UK and European exhibitions.
- A rental fleet of fine-pitch LED tiles maintained and tested between shows.
- Flexible supply — from single-wall LED infills to complete multi-wall LED video wall installations across an entire stand.
For more information on beMatrix-compatible LED for your next exhibition project, contact Dynamo to discuss your requirements.
BEMATRIX LED SKIN FAQS
What pixel pitch do I need for a beMatrix LED wall?
It depends on viewing distance. For trade show stands where visitors stand within one to two metres of the screen, DRE P1.55 or P1.93 panels are the usual choice; backdrop walls viewed from the aisle can use P2.58. For very close viewing — under a metre — fine-pitch options at 1.25mm and 0.93mm are available.
Can LED tiles be mixed with fabric or print infills on the same beMatrix stand?
Yes. LED panels and textile or print infills are interchangeable within the same frame system, so a single stand can combine video walls with printed graphics, and the mix can change between shows without altering the frame specification.
Do the same LED panels work with Aluvision frames?
Yes. Dynamo’s exhibition LED panels integrate with both beMatrix and Aluvision modular frame systems, so contractors working across both platforms can use one LED inventory for either build type.
Can I hire beMatrix-compatible LED panels instead of buying them?
Yes. Dynamo maintains a rental fleet of exhibition LED panels that are tested between shows, available on a hire basis alongside outright purchase — useful for stand builders whose LED requirement varies from show to show.
How is power and data cabling handled inside a beMatrix frame?
Cabling routes through the existing frame channels and rear-access points, so wiring stays hidden from visitors and no external cable management is needed on the stand face.
How do I get a specification for a beMatrix LED wall?
Use Dynamo’s LED screen configurator to enter your wall dimensions and receive a panel layout and specification, or contact the technical team to discuss the stand design directly.
